Quant in placement tests: the topics that appear most in service companies
If you have limited time, start with percentages, profit and loss, ratio, time and work, time speed and distance, and number system. These appear on nearly every preparation list for service-company tests, and they are the base for harder questions as well. After that, add averages and mixtures, interest, probability and permutations.
One caution before you plan around any numbers: no major recruiter publishes a topic-wise weightage. The percentages you see online, including the ones below, are estimates based on past tests and test-taker reports, and they do not fully agree with each other.
Quick facts
| Item | What we found |
|---|---|
| Share of quant in a test | Estimated at about 30% to 40% of aptitude-style tests (estimate, not official) |
| Level | Mostly school-level arithmetic, asked under time pressure |
| Target speed | About 1.5 minutes per question in practice |
| TCS NQT Foundation | Official: 75 minutes for numerical, verbal and reasoning together |
| TCS Numerical Ability | Reported: 20 questions in 25 minutes, no negative marking |
| Official topic weightage | Not published by the companies |
The topics, in the order we would study them
We compared topic lists and test-taker reports and grouped the topics by how consistently they appear.
| Priority | Topics | What the sources say |
|---|---|---|
| First | Percentages, profit and loss, ratio and proportion | Percentages alone are estimated at 10% to 15% of quant questions |
| First | Time speed and distance, time and work | On every major topic list; time and work shows up in almost every test |
| First | Number system, HCF and LCM | Often estimated as the single largest quant topic, and rated high by TCS test-takers |
| Second | Averages, mixtures, simple and compound interest | Steady but smaller share |
| Second | Probability, permutations and combinations | Estimates disagree: from 3 to 5 questions each down to only 1% to 2% of the test |
| Third | Algebra, geometry and mensuration, series | Worth basics; geometry is estimated at about 2 to 3 questions per exam |
| Last | Statistics | Rarely asked |
Because the estimates disagree on probability and permutations, do not skip them completely. Learn the basic types and move on.
How the tests differ
Patterns change between drives, and reports differ even for the same company. For example, recent reports give different question counts for Cognizant's numerical section, and they disagree on whether Wipro's aptitude section has negative marking. So use the numbers below only as a rough guide, and always read the instructions on the test screen.
- TCS NQT: TCS states that the Foundation part has numerical, verbal and reasoning ability in 75 minutes. Test-takers report 20 Numerical Ability questions in 25 minutes, which is about 75 seconds each. Unused time reportedly does not carry over to the next section.
- Difficulty: test-takers generally describe TCS as harder, and Accenture, Capgemini, Cognizant and Infosys as easier. Treat that as a general impression only.
For company-specific details, see our guides to the TCS NQT, Infosys, Wipro and Cognizant tests.
Three methods that save the most time
1. Know fractions as percentages. If you remember that 1/8 = 12.5% and 1/6 = 16.67%, many questions become one-step. For example, if a price rises by 25% (1/4), spending stays the same only if consumption falls by 1/5, which is 20%.
2. Use total work as an LCM. Suppose A finishes a job in 12 days and B in 15 days. Take total work as 60 units (the LCM). A does 5 units a day and B does 4, so together they do 9. The job takes 60 ÷ 9, or about 6.67 days. No fractions are needed until the last step.
3. Eliminate using the options. If the answer must be a whole number or must be larger than a given value, you can often remove two options before calculating anything.
Learn the standard method first and then shortcuts. A shortcut you half remember costs more time than the long method.
A three-week plan
- Week 1: core arithmetic. One topic a day: percentages, profit and loss, ratio, number system, time and work and time, speed and distance. Do 20 to 30 questions per topic and read every solution.
- Week 2: second-priority topics. Cover averages, mixtures, interest, probability, permutations and mensuration. Finish each day with 10 timed mixed questions.
- Week 3: speed and mocks. Take a timed section every day and a full mock every two or three days. Keep a mistake notebook and revise it before the test.
During timed practice, aim for about 1.5 minutes per question. If you are stuck for more than 2 minutes, move on. All these topics have free questions with solutions on Target Campus placement practice.
Frequently asked questions
Which quant topic is the most important for placement tests?
There is no official answer. Percentages and number system are both ranked at the top in different estimates, so prepare both. They also support profit and loss, data interpretation and many other questions.
Is one week enough to prepare for quant?
It may be enough to revise if your basics are already strong. If they are not, plan for at least three weeks. For full aptitude, including reasoning and verbal, 30 days is a sensible target.
Is there negative marking in the quant section?
It depends on the company and the drive. TCS Numerical Ability is reported to have none, but reports for other tests differ. Check the instructions before you start, because they decide whether you should guess.
Do I need to know advanced maths?
Rarely for service-company tests. Most questions are school-level arithmetic. Harder rounds, such as the Advanced part of the TCS NQT, ask tougher quant, so practise those only if you are aiming for the higher roles.
